BMW 2008 1 Series Owner's Manual page 198

1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Turn the controller until "Settings" is
selected and press the controller.
4. Turn the controller until "BMW Service set-
tings" is selected and press the controller.
5. If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Enabled services" is selected and
press the controller.
6. Select "Options" and press the controller.
7. Select "Terminate services" and press the
controller.
BMW Assist is blocked from use, and your vehi-
cle's current position will not be transmitted in
case of an Emergency Request
the services, reactivate BMW Assist, see below.
The contractual agreement is not affected by
this.
Reactivate BMW Assist, if necessary, to log on
again.
Activating BMW Assist
BMW Assist must be activated to use the ser-
vices.
196
Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG
Requirements
>
>
Activating
1.
2.
3.
4.
*
. To unblock
5.
Make sure that the vehicle can determine its
current location. Reception is best when
you have an unobstructed view to the sky.
Leave vehicle ignition switched on during
the activation process.
Press the button.
This opens the start menu.
Press the controller to open the menu.
Turn the controller until "Settings" is
selected and press the controller.
Turn the controller until "BMW Service set-
tings" is selected and press the controller.
If necessary, move the highlight marker to
the uppermost field. Turn the controller