Sport Program - BMW 2007 7 Series Owner's Manual

There are two programs.
With each press of the controller, you can
switch back and forth between "Comfort" and
"Sport".
Comfort program
The Comfort program is suitable for use
throughout the vehicle's entire speed range and
regardless of load.

Sport program

You should select the Sport program for consis-
tently performance-oriented response from
shock absorbers and steering.
FTM Flat Tire Monitor*
The concept
The Flat Tire Monitor keeps track of the infla-
tion pressures in the four mounted tires as you
drive. The system triggers an alert whenever
the inflation pressure drops significantly in rela-
tion to the pressure in another tire.
When a loss of pressure occurs, the rolling
radius changes and with it, the rotational speed
of the wheels. This change is detected and sig-
naled as a flat tire.
Functional requirements
To ensure the reliable signaling of a flat tire, the
system must be initialized at the correct tire
inflation pressure.
The initialization must be repeated after
every correction of the tire inflation pres-
sure and after every tire or wheel
System limits
The Flat Tire Monitor cannot indicate
sudden severe tire damage caused by
outside factors and does not detect a natural,
even pressure drop in all four
In the following situations, the system could be
delayed or malfunction:
> When the system has not been initialized.
90
Online Edition for Part no. 01 41 0 013 316 - © 02/07 BMW AG
>
>
>
Initializing system
The initialization automatically continues when
driving resumes. Do not initialize the system
when driving with snow chains
iDrive, for principle details, refer to page 16.
1.
2.
3.
4.
5.
change.<
tires.<
When driving on snow-covered or slippery
road surfaces.
Performance-oriented style of driving: slip
in the drive wheels, high lateral acceleration.
When driving with snow chains
The initialization is completed during driv-
ing, which can be interrupted at any time.
Select "Settings".
Select "Vehicle" and press the controller.
Select "Tires: FTM" and press the control-
ler.
The initialization menu appears.
Start the engine, but do not begin to drive.
Select "Reset tire pressure" and press the
controller.
During the initialization, "Reset will be com-
pleted while driving. A tire pressure loss
cannot be detected while resetting. Status:
resetting FTM..." appears on the Control
Display.
*
.
*
.<