Automatic Climate Control; A Congenial Climate - BMW 2007 7 Series Owner's Manual

Automatic climate control

1
AUTO program, left side of passenger
compartment, refer to section below
2 Outside air/AUC Automatic recirculated-air
control/recirculated air
3 Switching off automatic climate
control 105
4 Temperature, left side of passenger
compartment 105
5 Maximum cooling
6
Air volume, left side of passenger
compartment 106
7
Defrosting windows and removing
condensation 106
8 Air volume, right side of passenger
compartment 106

A congenial climate

For almost all conditions, the AUTO program 1
offers the optimal air distribution and air vol-
ume. Select an interior temperature that you
find pleasant.
The following section contains more detailed
information on the available setting options.
The settings are stored for the remote key cur-
rently in use.
AUTO program
The AUTO program handles the
adjustment of air distribution to the
windshield and side windows, in
the direction of the upper body, and in the foot-
well, as well as the adjustment of the air volume.
104
Online Edition for Part no. 01 41 0 013 316 - © 02/07 BMW AG
105
106
9
Temperature, right side of passenger
compartment 105
10 Residual heat mode
11 Rear window defroster
12 Switching cooling function on and off
manually 107
13 AUTO program, right side of passenger
compartment, refer to section below
14 Air grille for interior temperature sensor -
please keep clear and unobstructed
15 Parked car ventilation
>
lights up: activation time activated
> flashes: parked car ventilation
switched on
The current setting for air distribution appears
on the Control Display, refer to page 106.
It also adapts your instructions for the tempera-
ture to outside influences throughout the year.
The cooling is switched on automatically with
the AUTO program. At the same time, a con-
densation sensor controls the program so as to
prevent window condensation as much as pos-
sible.
Intensity of AUTO program
You can adjust the intensity of the AUTO pro-
gram by repeatedly pressing the AUTO button.
Press the button to have the current setting
briefly displayed on the lower status line of the
Control Display.
You can also adjust the intensity of the AUTO
program via iDrive.
106
107
109