Sockets; Pull-Out Cargo Floor - BMW 2006 X5 Owner's Manual

Cargo area
128n
Folding floor cover up
Disengage the loop end on the under-
side of the floor cover and hook it in
with the catch on the upper frame of the
liftgate cutout.
Before swinging down the floor cover,
reengage the loop end in the retainer
on the underside of the floor cover.

Sockets

When you fold the cover caps up, you
have access to additional sockets.
You can use the sockets for flashlights,
car vacuum cleaners or other automo-
tive appliances with up to approx.
200 watts at 12 volts. Be careful not to
damage the socket with unsuitable
plugs.
Also refer to page 121.
*

Pull-out cargo floor

To release, pull the handle recess
upward. Then pull the floor out.
Do not drive when the cargo floor
is pulled out.
Do not release the cargo floor on steep
grades. If you do, it could extend auto-
matically and cause personal injuries.
A load which is not properly secured
could slide if the floor extends automat-
ically and then drop to the ground as a
result of the rapid braking of the cargo
floor at the limit stop.<
Online Edition for Part No. 01 41 0 159 867 - © 07/05 BMW AG