Casio GZE-1 User Manual page 17

[POWER] Lamp Operation
Lamp Status
Lit Red, (Lit Amber)
Flashing Red
Off, (Lit Green)
• The information in parentheses in the above table shows the
lamp status while the camera is turned on during charging.
. Charging by Connecting to a Non-computer USB Port
Charging is possible from a device that meets USB standards and that satisfies the
conditions below.
• Output Voltage: 5 V
• Output Current: 2 A or less
. Other Charging Precautions
• With the two charging methods described above, you can charge the camera's
battery (NP-150) without removing it from the camera.
• This model can be charged only from a USB 2.0 specification USB port.
• Operation is not guaranteed in the case of a computer built or modified by you.
Even in the case of a commercially available computer, certain USB port
specifications may make it impossible to charge via the USB cable.
• A battery that is still warm immediately after normal use may not charge fully. Give
the battery time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
• Charging the camera's battery may cause interference with TV and radio reception.
If this happens, plug the USB-AC adaptor into an outlet that is further away from
the TV or radio.
• Actual charging time depends on current battery capacity and charging conditions.
• Use the USB cable that comes with the camera. The battery may not charge if
another USB cable is used.
Description
Charging
Abnormal ambient temperature,
charging taking abnormally long, or
battery problem (page 84)
Charging complete
17
[POWER] lamp
Quick Start Basics