Acura 2008 TL Owner's Manual page 323

Main Menu
Changing a Flat Tire
WHEEL NUT WRENCH
6. Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
320
Table Of Contents
7. Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting in the
jack notch.
2008 TL
EXTENSION
WHEEL NUT WRENCH
8. Use the extension and the wheel
nut wrench as shown to raise the
vehicle until the flat tire is off the
ground.