Setting To Use Wlan Control - Fujitsu ASYG09KMCDN Operation Manual

NOTES:
• This device complies with Part 15 of FCC Rules and Industry
Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of this device.
(UTY-TFSXF1 (AP-WF1E) and UTY-TFSXG1 (AP-WG1E) models
conform to IC (Industry Canada) standard.)
• This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
● Do not use this product in the following locations. Using
this product in such locations may cause communications
becoming unstable or not possible.
• Near wireless communication equipment that uses the
same frequency band (2.4GHz) as this product.
• Places where there are magnetic fields from equipment
such as microwave ovens, or static electricity or radio wave
interference occurs.
(Radio waves may not reach depending on the
environment.)
■ Personal Information (Security-related) Usage
Precautions
● There is a possibility of interception if you use wireless LAN
equipment due to the use of radio waves regardless of
whether you use encryption or not.
● Wireless LAN uses radio waves to exchange information
between this product and the wireless router. This means
it has the advantage of freely being able to make a LAN
connection if within reach of radio waves. On the other hand,
if the radio waves are within a certain range, they will reach
all locations beyond obstacles (e.g. walls). Therefore, it is
possible your communications may be intercepted and read
or illegally intruded upon.
● Do not connect to equipment and networks which you are not
authorized to use when setting up your wireless connection.
● Initialize the settings of this product when disposing it, or
transferring it to a third party.
■ Others
● Use this product as regular wireless LAN equipment.
• Do not use this product in hospitals or in/near locations with
medical equipment.
• Do not use this product within aircraft.
• Do not use this product near electronic equipment that
handles high-precision control or weak signals.
Examples of electronic equipment to be careful of:
Hearing aids, pacemakers, fire alarms, automatic doors and
other automatic control equipment
● This is not a guarantee of wireless connection and
performance with all wireless routers and in all residential
environments. Radio waves may not reach or may be
interrupted in the following situations.
• Use in buildings made from concrete, rebars or metal
• Installation near obstacles
• Interference with wireless communication equipment using
the same frequency
• Places where there are magnetic fields from equipment
such as microwave ovens, or static electricity or radio wave
interference occurs
● Install and setup this product only after reading the operating
manual of the wireless router.
En-9

9.2. Setting to use WLAN control

Step 1. Application software installation
1. Open "Google Play" or "App Store" depending on the type
of your smartphone or tablet PC.
2. Search for "FGLair".
3. Install the application software (mobile app) following the
instructions on your screen.
Step 2. User registration
1. Open the installed mobile app.
2. Register the user (with either a smartphone or tablet PC)
by following the instructions in the create an account
section of the mobile app.
Step 3. Air conditioner registration (pairing of WLAN
adapter)
NOTES:
• Before starting this setting, reconnect the power supply of the air
conditioner and wait for 60 seconds or more.
• Check that the smartphone or tablet PC is linked to the wireless
router you are connecting the air conditioner. The setting will not
work if it is not connected to the same wireless router.
• To control 2 or more air conditioners with the same smartphone or
tablet PC, repeat the setup of the chosen mode.
) Register the air conditioner by following the instructions in
the online manual on FUJITSU GENERAL web site.
www.fujitsu-general.com/global/support/
This operation manual describes only the setting procedure of the
remote controller.
<How to access the online manual>
1. Sign in to the mobile app.
2. Open the side menu of the mobile app then tap [Help].
3. Tap [WLAN Support].
When the registration is completed, [
will turn on.
For reference
<Manual mode>
Setting procedure of the remote controller
NOTES: If you do not press any buttons of the remote controller for
60 seconds, the remote controller display will return to the
original display.
1. Press until only the clock is displayed
on the remote controller display.
2. Press down on the remote controller
for more than 5 seconds.
will be displayed on the remote controller
display.
3. Press .
4. Select using
controller.
5. Press
.
The indoor unit enters Manual mode and [
indicator on the indoor unit will blink.
NOTES: If the registration is not be finished in several minutes,
Manual mode is canceled and [
In this case, please repeat the remote controller setting.
] indicator on the indoor unit
on the remote
]
] indicator turns off.