EAW MK2294 Technical Specifications

DESCRIPTION

EAW's MK2294 two-way loudspeaker system provides high
output, low distortion sound reinforcement for a wide range
of permanently installed audio applications.
The 12-in low frequency cone and 1.4-in exit/75mm voice
coil high frequency compression driver provides higher out-
put and lower distortion plus enhanced power handling ca-
pabilities.
EAW's advanced beamwidth matching crossover selects a
crossover point where the HF horn's beamwidth matches that
of the woofer. The result is more even off-axis frequency
response (power response) for more complete coverage.
The MK2294 is a biamplified loudspeaker requiring the use
of pre-configured MX Series processor settings.

APPLICATION

The MK2294 was designed to support the widest possible
range of permanent installations and was optimized for use
in distributed systems.
Its high output capabilities let it cover a large seating area
in such applications as houses of worship, themed enter-
tainment venues, arenas, stadiums and nightclubs.
The comprehensive system of integral 3/8"-16 threaded
mounting points permit safe, load-rated suspension.
DESCRIPTIVE DATA
Configuration 2-way, Full Range
Powering Biamplified
LF Subsystem 1x 12-in, Vented
HF Subsystem 1x 1.4-in Exit/75mm Voice Coil
Compression Driver on Constant
Directivity Horn
Coverage Angles (h° x v° ) 90 x 45
Cabinet Type (shape) Trapezoidal
Enclosure Materials Baltic Birch Plywood
Finish Wear-resistant Textured Black
Paint
Connectors 2x 2-Terminal Barrier Strip
Suspension Hardware (13) 3/8"-16 Threaded Mounting
Points (3 each on top and bottom,
2 per side, 3 on rear)
Grill Powder Coated Perforated Steel
Dimensions Inches Millimeters
Height 30.00
Width (front) 15.54
Width (back) 8.23
Depth 14.75
Trapezoid Angle 15 Degrees per Side
Weights Pounds
Net Weight 60
Shipping Weight 72
Acoustic Performance Partnership
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email info@eaw.com
One Main Street, Whitinsville, MA 01588 • (508) 234 - 6158 • FAX (508) 234 - 8251 • Email info@eaw.com • Web http://www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. • PUB#888177 MK2294/2p/4/1/00 • Printed In USA
TECHNICAL SPECIFICATIONS MK2294
762
395
209
375
Kilograms
27.2
32.7
Eastern Acoustic Works MK2294