Software Updating - Sharp LC-60LE635E Service Information

LC-60LE635
LC-60LE638

Software Updating

1. Turn on the AC power.
2. Insert the upgrading USB flash memory for upgrade into the service slot.
(After a while, an external input changes into USB automatically.)
3. Use the Menu button and cursor keys ( / /
- USB update on OSD menu.
4. The message (Insert the USB memory device contains the software update file) shows up.
Push OK when if there is no problem.
5. After a while, if software update file is detected in the USB memory device, the following screen shows up.
Select OK when if there is no problem.
NOTE: If USB memory device isn't correctly inserted in TV, caution shows up.
Please insert USB memory device and retry software update.
NOTE: If there are more than two software update files in the USB memory device, caution shows up.
Please insert one file and retry software update.
NOTE: If there is no software update file in the USB memory device, caution shows up.
Please insert the correct file and retry software update.
NOTE: If software update file in the USB memory device doesn't mutch this model, caution shows up.
(Because Model name is unmatched or check sum error occurs)
Please insert the correct file and retry software update.
NOTE: If software update file in the USB memory device is already installed, caution shows up.
Please reconfirm the software version and reinstall (if necessary)
SOFTWARE UPDATING
/ ), Ch keys (
[Information Software update
Insert the USB memory device containing
the software update file.
ENTER:Enter
TV
[Information Software update
Software update file is detected
in the USB memory device
Current version
xxxxxxxxxxxx
Update version
xxxxxxxxxxxx
Yes
/ ) of R/C or on the set to select Menu - Setup - Information - Software update
USB update]
OK
USB update]
start update
No
36