Initialization To Factory Settings - Sharp LC-60LE635E Service Information

15. Initialization to factory settings

CAUTION: When the factory settings have been made, all user setting data, including the channel settings, are initialized.
(The adjustments done in the adjustment process mode are not initialized.) Keep this in mind when initializing these settings.
Adjustment item
1 Factory settings
After adjustments, exit the adjustment process mode.
To exit the adjustment process mode, unplug the AC power cord from the outlet to forcibly turn off the power.
When the power is turned off with the remote control, unplug the AC power cord and plug it back in (wait approximately 20 seconds before plugging
in the AC power cord)
After completing the NET connection., execute the NET initialization (Record of the server access)
Please execute the initialized in the factory setting again when you turn on the power supply after the initialized in the factory setting is set.
Adjustment conditions
Ends by turning off the [Factory setting with adjustment process mode]
MAIN POWER key. • Enter the adjustment process mode.
(See to below caution) • Move the cursor to [INDUSTRY INIT] on page 2/23.
• Use the R/C key to select a region from [EUROPE/RUSSIA/ SWEDEN] and
• "EXECUTING" display appears.
• After a while, "SUCCESS" display appears, the setting is completed.
When succeeding: Background color (green)
When failing: Background color (red)
The following items are initialized in the factory setting.
1) User settings
2) Channel data (e.g. broadcast frequencies)
3) Maker option setting
4) Password data
Adjustment procedure
press the [OK] key.
35
LC-60LE635
LC-60LE638