Installation Location - Emerson PACSystems RX3i Quick Start Manual

Quick Start Guide Chapter 2
GFK-2939A Sep 2019
CAUTION
Over tightening the mounting screws could crack the
plastic housing.

Installation Location

This product is intended for use with the RX3i system. Its
components are considered open equipment (having
live electrical parts that may be accessible to users) and
must be installed in an ultimate enclosure that is
manufactured to provide safety. At a minimum, the
enclosure shall provide a degree of protection against
solid objects as small as 12mm (e.g. fingers). This
equates to a NEMA/UL Type 1 enclosure or an IEC60529
IP20 rating providing at least a pollution degree 2
environment. For details about installing RX3i rack
systems, refer to PACSystems RX3i System Manual,
GFK-2314.
If you need technical help, contact Technical Support.
For phone numbers and email addresses, see the back
cover of this Guide.
Hardware Installation 8