Breville Smart Mist Top Connect Instruction Book page 15

Hide thumbs Also See for Smart Mist Top Connect:
Table of Contents

Advertisement

WARM MIST AND ION
WARM MIST
• This humidifier has a WARM MIST feature.
A small internal heating plate will heat the
water to create a warm vapour.
• WARM MIST can be activated on its own, or
together with ION, in all modes.
• WARM MIST can operate automatically
in all modes.
ION
• This humidifier has an ION feature. ION is
generated and released in the mist. The ION
will then catch and hold DUST particles in
the air, helping to purify the air in the process.
• ION can be activated on its own, or together
with WARM MIST, in all modes.
• ION can operate automatically in all modes.
1. Touch the
WARM MIST/ION symbol
on the control panel to turn on warm mist.
The
WARM MIST icon will illuminate
on the display screen and warm mist will
emit from the mist nozzle gradually within
10-15 minutes.
NOTE
Warm mist will start after the water has time
to heat. The time will vary depending on
factors such as the temperature of the water
in the tank.
2. Touch the
WARM MIST/ION symbol
again. The
ION icon will illuminate on
the display screen and ION will emit from
the mist nozzle through the mist.
3. To turn WARM MIST off, but keep ION on,
touch the
WARM MIST/ION symbol
again. The <Insert WARM MIST icon here>
WARM MIST icon will stop illuminating
on the display screen, while the
will remain illuminated. ION will continue
to emit from the mist nozzle.
4. To turn ION off, touch the
again. The
ION icon will stop
illuminating on the display screen. Both
WARM MIST and ION are now off.
AROMA TRAY
• Press the aroma tray on the side of the
humidifier and it will click out of the unit.
• Add 2–3 drops of essential oil (not included)
directly to the pad in the aroma tray.
• Push the aroma tray back into the humidifier
until it clicks into place.
• Turn the humidifier on and the aroma will
start emitting automatically with the mist.
Increase the mist intensity as desired.
WARNING
Never add essential oil directly to the water
tank, the water inlet basin or any other part of
the humidifier except the aroma tray felt pad.
Do not use more than 2–3 drops of oil on the
aroma tray felt pad at any one time. Only add
more oil when the aroma in the surrounding air
has dissipated.
AUTO SHUT-OFF
• Once the water in the water tank and water
inlet basin is too low to keep the machine
running, the
will illuminate red on the display, 3 beeps will
sound and the humidifier will stop working.
The
illuminated.
• Fill the water tank, turn the humidifier on and
program the desired mode.
• To recommence, turn the humidifier off at
the power outlet, fill the tank and reprogram.
The
illuminating and the humidifier will start.
• If night mode is activated, the humidifier
will not beep when the
EMPTY icon illuminates.
IMPORTANT
ION icon
All operating modes will be cancelled if the
water tank runs empty. The humidifier will
automatically shut off when there is insufficient
water to operate.
symbol
WATER TANK EMPTY icon
POWER symbol will turn red and stay
WATER TANK EMPTY icon will stop
WATER TANK
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lah508Lah508grt2ian1

Table of Contents