Functions - Breville Smart Mist Top Connect Instruction Book

Functions

YOUR BREVILLE HUMIDIFIER
• The humidifier comes with a memory feature.
When turned on from Standby mode, it will
start on the settings used previously.
• The control panel lights will dim after
approximately 30 seconds if not touched.
Touch the POWER symbol once, where the
control symbols are located to wake up the
screen, then select any function.
• The Timer, Night mode, Warm mist and ION
features can be used in any mode.
• The humidifier will check the humidity level
once every minute.
• The room temperature and humidity will
alternate on the display screen approximately
every 10 seconds when in operation on all
modes except adjustable humidity mode.
• Manual adjustment of the Mist intensity
control bar will exit any programmed
settings, except ADJUSTABLE SPEED and
manual setting.
• Touch and hold the WARM MIST symbol
to turn off the mood light in the water tank.
Repeat to turn back on.
WATER TANK EMPTY
• When empty, the
icon will illuminate and the humidifier will
automatically turn off.
SENSAIR SYSTEM™ LIVE
COMFORT CONTROL
• Your Breville Smart Mist Top™ Connect
Humidifier has a sensor to detect changes
to humidity and temperature in the
surrounding area.
• On FULL AUTO and ADJUSTABLE
SPEED modes, the SensAir System™
will automatically keep the humidity
in the "Comfort Zone" by setting the
appropriate level of relative humidity,
depending on ambient air temperature for
maximum comfort.
12
• To override the RH level touch the
HUMIDITY/NIGHT symbol. This will switch
the mode to ADJUSTABLE HUMIDITY.
OPERATING YOUR HUMIDIFIER
NOTE
When connected to the power outlet and
turned on for the first time, the humidifier
will operate for one minute in order to sense
the ambient conditions, and then will enter
FULL AUTO mode.
FULL AUTO MODE
• FULL AUTO mode is the default setting for
the humidifier when the unit is turned on
from the power outlet. FULL AUTO mode
can also be manually selected.
• The Timer, Night mode, Warm Mist and
ION features can be used with this setting.
You do not need to adjust Humidity and Mist
Intensity level in FULL AUTO mode.
1. Touch the HUMIDITY/NIGHT symbol
on the control panel until 'AU' illuminates.
Once FULL AUTO mode is set, the
FULL AUTO icon, will illuminate on the
display screen.
2. FULL AUTO mode automatically adjusts
the mist intensity to regulate the humidity
level between 30-65%RH based on the
temperature within the room.
NOTE
• FULL AUTO mode is not recommended
where room temperatures reach above 30°C.
• The mist intensity level will not illuminate as
it will automatically modulate to achieve the
desired humidity level.