EAW Commercial CXA 80 Specifications

DESCRIPTION
The new EAW Commercial CXA80 power amplifier features a flexible
input/output design that makes it ideal for stand-alone operation as
well as a convenient solution where additional system zones need
to be added. Specifically intended for a wide variety of installation
applications, CXA80 is outfitted with both a standard audio input
as well as a dedicated priority input, combining to make them very
cost-effective two-input by one-output units.
Two combination mic/line inputs are actively balanced, with
individual adjustable potentiometers for line level input, mic level
input, and mic level input with 24-volt DC phantom power. Input 1
and the priority input are divided into four discrete input sections:
a combination XLR/TRS connector, Phoenix connector, or barrier
strip. Meanwhile, a Parallel output provides handy "loop-through"
capability - the means to pass un-amplified line level signals
downstream to additional amplifiers via barrier strip, Phoenix, 1/4-
inch or XLR outputs.
Priority announcements can be initiated with external contact
closures or adjustable signal threshold levels. External volume
control is also possible through a Phoenix connector as well as
a user-supplied potentiometer. Further, a two-position Phoenix
connector allows the internal fault relay to be connected to
redundant systems.
Front panel controls include low and high EQ controls which offer
12 dB of boost or cut at 100 Hz and 10 kHz, respectively. A master
volume control offers output volume control, while distinctive LEDs
indicate power (green), signal (amber), overload (red), and fault (red).
The CXA80 provides 80 watts of output power at 100 volts, 70.7 volts,
25 volts and 4 Ohms. An intelligent output stage is fully protected
against permanent damage caused by overloading, shorts and
thermal faults.
CXA80 operates on 100 volts to 240 volts AC (50/60 Hz) and is
supplied by a detachable IEC power cord. A combination banana
plug/binding post connection is also provided for connecting an
external 24-volt DC backup battery.
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
2 INPUT X 1 OUTPUT 80 W POWER AMPLIFIER
TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 1 of 2
CXA 80
Features
• Two combination 1/4-inch/XLR/Phoenix,
or barrier strip Mic/Line inputs
• One parallel output on barrier strip, Phoenix,
1/4-inch or XLR
• Selectable 24-volt phantom power
• Dedicated priority input
• Internal fault-activated relay
• External volume control
• 4-Ohm, 25-volt, 70-volt and 100-volt outputs
• Automatic changeover to 24-volt DC backup power
• Universal power supply
Applications
• Paging Systems • Houses of Worship
• Hotel and Ballrooms • Meeting Rooms
• Schools • Offices
• Foreground/Background Music Systems
CXA80
CXA 80
Part No. SW0509 Rev. A 04/07