Sony MZ-NHF800 Operating Instructions Manual page 53

4
Press the jog lever to enter the
selected sound mode.
To cancel the setting
Press SOUND repeatedly until the
indication at B disappears.
To modify and store the sound
You can modify the sound and store the
results in "Custom1" and "Custom2".
1
Do steps 1 to 3 of "Selecting the
sound quality (6-Band Equalizer)"
(page 52), and slide the jog lever until
"Custom1" or "Custom2" appears.
2
Press the jog lever.
3
Slide the jog lever repeatedly to select
the frequency.
Frequency (100 Hz)
From the left, you can select 100 Hz,
250 Hz, 630 Hz, 1.6kHz, 4 kHz, or 10 kHz
4
Press VOL +, – repeatedly to adjust
the level.
Level (+10 dB)
You can select from among seven levels.
–10 dB, –6 dB, –3 dB, 0 dB, +3 dB, +6 dB, +10 dB
5
Repeat steps 3 and 4 to adjust the
level for each frequency.
6
Press the jog lever to enter the
selection.
Note
Virtual-Surround and 6-Band Equalizer will not
function during recording.
On the recorder
Jog dial
5-way control key
(NENT, .,
>)
Varying the virtual sound to
create different acoustics
(Virtual-Surround)
1
Enter the menu and select "Sound" -
"V-SUR".
2
Turn the jog dial repeatedly to select
the surround mode, and then press
NENT to enter the selecteion.
A
Indication which represents each sound
mode appears.
B
Each time you turn the jog dial, A
changes as follows. When you press
NENT, B appears.
A
Studio
Live
Club
Arena
NAVI/
MENU
B
VS
VL
VC
VA
53