Compaq Presario 7400 Series Maintenance And Service Manual page 16

Compaq.com - Compaq Presario Maintenance and Service Guide - 7400 Series
Maintenance and Service Guide
Compaq Presario 7400 Series Computers
MSG index
Home
Removal Sequence
Before you begin
Serial number
Chassis
Power supply
Mass storage devices
Fax-modem
PCI bracket
System board
Instant On button board
Creativity Action Center
privacy and legal statement
http://www.compaq.com/athome/support/msgs/7400/pwrrmv.html [1/8/2002 3:52:11 PM]
Product Description
Removal & Replacement
REMOVAL & REPLACEMENT PROCEDURES
Troubleshooting
Jumper & Switch Information
Illustrated Parts Catalog
Specifications
Power Supply
1 Perform preparation procedures.
2 Remove the chassis.
3 Gently lay the computer on its side with back
connectors closest to the working surface.
4 Remove the four screws that secure the
power supply to the back of the chassis as
shown.
5 Slide the power supply away from the back
of the chassis , rotate it up and away
and slide it to the right to remove it from the
slots.
6 Disconnect the power supply cables from the
system board, hard drive, floppy drive, and
CD/DVD drive and remove the cables from
the chassis.
Replacement
To replace the power supply, reverse this
procedure.
United States
,