Eagle 6 Installation And Operation Instructions Manual page 56

2. Open the Route List Window: click | .
V R L
IEW OUTE IST
3. Right-click on the route name. In the pop-up menu, click the
C
REATE
command.
B A R
ORDERS ROUND OUTE
The Create Borders Around Route pop-up menu appears when you
right-click a route name in the Route List Window. In this example, we
are creating a corridor map border for a route from Dallas to Corpus
Christi, Texas. Route name is "Dallas-Corpus."
MapCreate draws a corridor map border following the route. See the
illustrations below, showing the route before and after the command is
performed.
Route from Dallas to Corpus Christi, Texas (left) and the corridor map
created automatically from the route (right).
52