Service Mode; Error Code Memory Function - Panasonic Lumix DMC-G1KPP Service Manual

6 Service Mode

6.1.

Error Code Memory Function

1. General description
This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the
latest. When the error is occurred more than 16, the oldest error is overwritten in sequence.
The error code is not memorized when the power supply is shut down forcibly (when the unit is powered on by the battery, the
battery is pulled out) because the error code is memorized to FLASH ROM when the unit is powered off.
2. How to display
The error code can be displayed by the following procedure:
Before perform the error code memory function, connect the AC adaptor or insert the battery and insert the SD memory card.
• 1. The temporary cancellation of initial setting:
Set the Drive mode lever to [ SINGLE ].
While keep pressing [ DISPLAY ] and [ FILM MODE ] buttons simultaneously, turn the Power on.
• 2. The display of error code:
Press [ FILM MODE ], [ MENU/SET ] and "[ LEFT ] of Cursor buttons" simultaneously with the step 1 condition.
The display is changed as shown below when the above buttons is pressed simultaneously.
Normal display → Error code display → Operation history display → Normal display → .....
• 3. The change of display:
The error code can be memorized 16 error codes in sequence, however it is displayed 5 errors on the LCD.
Display can be changed by the following procedure:
"[ UP ] or [ DOWN ] of Cursor buttons" : It can be scroll up or down one.
"[ LEFT ] or [ RIGHT ] of Cursor buttons" : It can be scroll up or down every 5 error, when the same button is pressed in twice.
(When it is pressed at once, skip two data line. When it is pressed in twice, skip three data line.)
• 4. How to read the error date:
The error date code is displayed from the left in order at the year, month, day, time.
Error date information is acquired from "Clock setting" information when the error occurs. When the clock is not setting, it is
displayed as "00000000".
Example of Error Code Display
34