Connecting A Second Vcr To Record From The Tv; Connecting A Dvd Player - Samsung CT29M16MQU Owner's Instructions Manual

AA68-03465A-00Eng_XTC
I
N S TA L L AT I O N

Connecting a Second VCR to Record from the TV

Your TV can send out signals of its picture and sound to be recorded by a second VCR.
To do this, connect your second VCR as follows:
(The VCR input jacks might be either on the front or on back of the VCR.)
Refer to your VCR' s instructions for more information about how to record using this kind
of connection.

Connecting a DVD Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1
Connect a set of audio
cables between the
AUDIO INPUT 2 jacks on
the TV and the AUDIO
OUT jacks on the DVD
player.
2
Note: For an explanation of Component video, see your DVD player's owner's manual.
Note: This figure shows the Standard connector-jack panel. The actual configuration for
your TV may be different.
5/7/04 1:30 PM Page 15
All manuals and user guides at all-guides.com
1
TV Rear Panel
Connect a set of audio
cables between the
AUDIO OUT jacks on the
TV and the AUDIO IN
jacks on the VCR.
2
Connect a video cable TV Rear Panel
between the VIDEO OUT
jack on the TV and the
VIDEO IN jack on the
VCR.
DVD Player Rear Panel
DVD Player Rear Panel
Connect a video cable
between the COMPO-
NENT INPUT (Y, Pb, Pr)
jacks on the TV and the
COMPONENT VIDEO OUT
(Y, Pb, Pr) jacks on the
DVD player.
Audio Cable
Video Cable
TV Rear Panel
Audio Cable
TV Rear Panel
Video Cable
VCR Input Panel
VCR Input Panel
15