Nokia NPM-6 Series Disassembly And Assembly Instructions page 7

CCS Technical Documentation
Exchange of battery connector
These are the two soldered support angles.
Push tweezers in outer openings of battery connector and
lift up the plastic cover.
Note that you need a soldering iron with higher
temperature when cleaning or soldering the grounding
pad.
Issue 2 06/03 CopyrightNokia. All rights reserved
Disassembly and Assembly Instructions
Use a side cutter to cut the support angles.
Desolder all pins and clean the pads.
Tin one of pads to fix the connector before soldering the
following pins.
NPM-6/6X
Page 7