Periodic maintenance and adjustment
1
1. Turn signal light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the turn signal light unit by
installing the screw. NOTICE: Do
8
not overtighten the screw, oth-
erwise the lens may break.
[ECA11192]
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screw.
1. Screw
2. Remove the license plate light
bulb socket (together with the
bulb) by pulling it out.
8-34
EAUM3510
1
1. License plate light bulb
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the license plate light unit by
installing the screw.
1