GE 29880 User Manual page 13

2. Press either review up or down button to scroll among the seven menu
screens, which are:
• SET OR
• LOCAL AREA CODE (default - - -)
• REGIONAL AC'S (all default - - -)
• SELECT LANGUAGE (default English)
• SELECT CONTRAST (default 3)
• T/P DIAL MODE (default tone)
• EXIT SETUP
NOTE: You have ten seconds following any key press before the phone
automatically returns to the CALLS summary screen.
S Y
ETTING OUR
The telephone uses the programmed area code to determine the number
format to display when a valid Caller ID signal is received. The
programmed area code is also used for the dialback feature.
1. After the unit enters the setup menu, press the review up button until
LOCAL AREA CODE appears.
2. To enter or change the area code, press the options button. The display
shows the stored area code. The left-most digit or a minus sign (-)
flashes, indicating the unit is ready to accept the area code entry.
3. Press review down to choose 9-0 for the first digit.
4. When the desired digit is flashing, press review up to advance to the
next digit.
L A C
OCAL REA ODE
13