Back; Remote Control - Dynex DX-LTDVD19 User Manual

TV/DVD combo components

Back

# Jack Description
1 PC AUDIO IN Connect the audio for a computer to
this jack. For more information, see
"Connecting a computer" on page 12.
2 Pr, Pb, Y Connect the video for a component
video device to these jacks. For more
information, see "Connecting a
component video device" on page
11.
3 S-VIDEO Connect an S-Video device to this
jack. For more information, see
"Connecting a VCR with an S-Video
cable" on page 11.
4 HDMI Connect an HDMI device to this jack.
An HDMI cable carries both video and
audio. You do not need to make an
additional audio connection. For
more information, see "Connecting
an HDMI device" on page 11.
5 VGA IN Connect the video for a computer to
this jack. For more information, see
"Connecting a computer" on page 12.
6 R and L AUDIO Connect audio for a component
video device to these jacks. For more
information, see "Connecting a
component video device" on
page 11.
7 VIDEO IN Connect a standard AV device to this
jack. For more information, see
"Connecting a VCR with a standard
AV cable" on page 10.
8 R and L AUDIO Connect the audio for an S-Video or
standard AV device to these jacks. For
more information, see "Connecting a
VCR with an S-Video cable" on page
11 or "Connecting a VCR with a
standard AV cable" on page 10.
9 Connect headphones to this jack.
(headphone)
10 ANT IN Connect a TV antenna or cable TV to
this jack.
4
1
5
6
2
3
7
8
9
10

Remote control

# Button Description
1 Press to turn on your TV/DVD combo
POWER
or to put it in standby mode. When
your TV/DVD combo is in standby
mode, power is still flowing into your
TV/DVD combo. To disconnect all
power, unplug the power cord.
2 INPUT Press to select the video input source.
For more information, see "Selecting
the video input source" on page 13.
3 DVD Press to switch to DVD mode.
4 OPEN/CLOSE Press to eject the disc from the disc
slot.
5 PICTURE Press to select the picture mode. For
more information, see "Selecting the
picture mode" on page 14.
6 SLEEP Press to set the sleep timer. For more
information, see" Setting the sleep
timer" on page 15.
7 Press to select a digital sub-channel.
For more information, see "Changing
TV channels" on page 13.
7