Table of Contents
Advertisement
PAMS Technical Documentation
Menu Driven Easy NAM Programming
1 Turn on the phone and enter the Programming Access Code
*#6391# for NAM1 with a random A-key value
*#6392# for NAM2 with a default A-key value
2 Enter the 10 digit Area Code and Phone Number
and press the TALK key (or the "OK" softkey in the display)
3 Enter the System ID Code (SID) supplied by the cellular service provider
(1 -5 digit SID) and press the TALK key (or "OK" softkey in the display)
– Optional settings are Language and Lock Code (see below)
– Programming is completed
– The phone automatically powers off and then back on
NOTE: Change the Lock code by adding a pound sign (#) and the new lock code after the SID.
(Example: 175#7788; Lock code = 7788).
Change the Language by adding a pound sign and new language code after the code
(Example: 175#0; Language = English).
Language Code: 0 (default) = English, 1 = French, 2 = Spanish, 3 = Portuguese.
Change the Lock Code and Language code by separating each set of numbers by a pound sign
(Example: 175#7788#2; Where the SID = 00175, Lock code = 7788, Language = Spanish).
Complete NAM Programming Instructions
Access NAM Programming Mode:
1 Turn the phone on.
2 Enter the NAM access code.
Factory default is: * 3 0 0 1 # 1 2 3 4 5 #
3 If the screen to the right appears, the access code
was entered correctly.
If after several attempts you cannot access NAM programming, it is possible that
the NAM 2 access code has been changed, or the phone is in need of service.
MAIN MENU Selection
4 Press the [Scroll-Key] up or down until the indicator points at the desired menu
option. Select from the following:
NAM 1
SW version
5 Press the [Select] softkey to access the Sub-Menu from and of the above Main
Issue 4 03/01
General Information and NAM Programming
RAMMING FOR NOKIA 6120/6
NAM 2
Security
Serial No.
Field Test
Nokia Mobile Phones Ltd.
NSC-1
nENNDPORTABLES
Emergency
Page 15
Advertisement
Table of Contents
