Operation - Ariens Grand Sierra GT 831026 Owner/Operator & Parts Manual

WARNING: AVOID INJURY. Read and
understand Operational Safety Rules before
proceeding.
CONTROLS AND FEATURES
See Figure on page 2 for all Controls and Features
locations.
TO STOP IN AN EMERGENCY
Turn ignition key to OFF.
PRE-START
Refer to tractor's owner manual for tractor pre-starting
and operation.
Transport the equipment to the area to be mowed.
IMPORTANT: Place Hydraulic Lift Lever to the raised
position when transporting.
Set cutting height. See Service and Adjustments .

OPERATION

ENGAGING MOWER
Refer to tractor's owner's manual for tractor starting
and shut off.
To start mower:
1. Set desired cutting height.
2. Place Hydraulic Lift Lever in the FLOAT position.
3. Place throttle lever at 1/3 speed.
4. Engage PTO.
5. Move the throttle lever to full speed.
To disengage mower, disengage PTO. Keep the PTO
disengaged when not mowing.
OPERATING TIPS
Be sure to keep your mower blades sharp.
Check pitch and level of mower frequently.
If grass is high or contains a high amount of moisture,
cut the grass twice. On the first pass, cut grass higher
than normal. On the second pass, cut grass at the
desired height.
Cut grass when it is dry.
Plan your cutting pattern to always trim with the left
side of the mower.
Make slow turns when cutting to prevent scuffing lawn.
GB - 9