Programming The Double Quantity Pad - Panasonic NE-1037 Operating Instructions Manual

C. Programming the Double Quantity Pad:
Your oven is preset at the factory to automatically double the programmed time for multiple portion heating.
This model allows you to customize the heating time and/or power level for multiple portions of your menu
items.
For example, if Memory Pad 2 is set for 20 seconds at HI (high power), 40 seconds at HI (high power) is set
for double quantity heating automatically. However, if your own tests have determined that the correct heating
time required for two portions is less (only 30 seconds at HI), you can program as shown below.
Example: To program 30 seconds at HI (high power) on double quantity of Memory Pad 2 (display must be
blank)
1.
2.
3.
4.
5.
6.
NOTE: • Program the remaining Memory Pads as desired by repeating steps 1 - 6 above. You may insert up to
10 memory programs.
• When the Program indicator "PROG" is blinking, the program can be cancelled and/or the pad number
erased by pressing the Stop/Reset Pad.
F0003BS90QP_Eng_00_20150722.indd Sec1:11 F0003BS90QP_Eng_00_20150722.indd Sec1:11
How to Operate
• Press the Program Pad.
Note:
• If no "PROG" Indicator appeared on
display, "Program Lock" should be
cancelled. (See page 11)
• Press Double Quantity Pad.
• Press the Memory Pad 2.
The pad number and the previously
selected time and power level for double
quantity heating will briefly appear in the
display.
• The pad number and Stage Heating
Indicator will reappear in the display.
• Press the Power Level Selector Pad
once. The Memory Pad number will go
out.
• Press Memory Pads 3 and 0.
• Press the Program Pad again. You have
completed programming the selected
Memory Pad for double quantity heating.
• 2 seconds later, the display will confirm
your programming.
• 2 seconds later, the display will go blank.
- 11 -
2015/7/22 9:46:01 2015/7/22 9:46:01