Unpacking And Removing Packing Materials; Stacking The Pedestal Washing Machine - LG F70E1UDN0 Owner's Manual

Unpacking and Removing
Packing Materials
1
Lift the appliance off the foam base.
• If you must lay the appliance down to
remove the carton base, always protect
the side of the appliance and lay it
carefully on its side. Do not lay the
appliance on its front or back.
2
Pull and save the foam block for future use.
• If the washing machine must be moved in
the future, the foam block will help prevent
damage to the washing machine during
transportation.
NOTE
• To prevent damage, do not remove the foam
block until the washing machine is at the final
location.
3
Turn the top cover about 180 degrees.
• Cover the upper hole with the top cover
and install 4 short screws (included in
packing box) to fix it in place.
Short screws
WARNING
• The top cover must be installed to avoid the
risk of electric shock or short circuit from
water drops. Failure to do so can cause
serious injury, fire, electric shock or death.
12
Stacking the Pedestal
Washing Machine
1
2
3
Top cover
Make sure the leveling feet on the front-
loading washing machine are fully retracted
before stacking. Place the front-loading
washing machine on top of the pedestal
washing machine. Make sure the holes on
the pedestal washing machine align with the
holes in the front-loading washing machine.
Stacking holes
Install 4 long screws (included in box) at
each corner to securely attach the front-
loading washing machine to the pedestal
washing machine.
Turn the feet of the front-loading washing
machine slightly until it is snugged up
against the pedestal washing machine.
EN
Stacking holes
Long screws