Safety; Safety And General Precautions - Siemens milltronics WEIGHFEEDER 1200 Series Instruction Manual

Safety

Safety and General Precautions

WARNINGS:
Always follow safe practices when working on or around the
Milltronics Weighfeeder 1200, especially in wet environments and
when adjacent to conductive steel mounting framework.
ALWAYS STOP the belt, lock-out, and/or place a "Do Not Energize"
tag on the main disconnect before working on or around the
weighfeeder.
A weighfeeder can be dangerous. Pinch points exist along the conveyor belt.
Note:
Secure the weighfeeder when:
• replacing the belt
• working on or around the load cell(s)
• working on or around the speed sensor
• working on or around drive components
WARNING: Whenever working near chain or belt drives, make sure
the guards are in place and the equipment is safely secured. The
pinch points created by these drives can be serious.
Page 2 Weighfeeder 1200 - INSTRUCTION MANUAL 7ML19985EH02