Using The On-Screen Menus - Dukane ImagePro 8043 User Manual

Using the On-Screen Menus

The projector has menus that allow you to make image adjust-
ments and change a variety of settings.
To open the on-screen menus, press the
keypad or remote. This displays the
and
Keystone Volume
buttons. Press the down arrow button to move the cursor down
and press the up arrow button to move the cursor up. The
selected menu is highlighted.
To change a menu setting, use the up and down arrow buttons to
move the cursor up and down to the item you want to change
(the selected item is highlighted), then press the
button on the keypad or the
left and right arrows to adjust the setting, or use the up and down
arrows and the
Select
when you are done.
Source/Select
To access a sub-menu, highlight it and press
navigate back to the previous menu, highlight the arrow at the
top of the menu and press
Press the up and down arrows to move to another setting. When
you have completed your adjustments, press
menus.
Menu
Basic
buttons on the keypad to menu navigation
button on the remote. Use the
Select
button to turn a setting on or off. Press
.
Source/Select
button on the
menu and changes the
F
IGURE
On-screen menu
Source/Select
. To
Source/Select
to close the
Menu
NOTE: Some menu items may be
grayed out (dimmed) at certain
times. This indicates the item is
not applicable to your setup or the
item is not enabled until another
selection is made.
13
21