AEG DCB331010M User Manual page 24

24 www.aeg.com
Step 1
Step 2
Step 3
Step 4
11.3 How to use: Catalytic
cleaning
The cavity is coated with catalytic
enamel. It absorbs fat during catalysis.
Turn off the oven and wait
until it is cold.
Step 1
To clean the top oven
set the function:
To clean the main oven
set the function:
11.4 How to remove and
install: Door
You can remove the door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
The door is heavy.
Turn off the oven and wait un‐
til it is cold.
Pull the front of the shelf sup‐
port away from the side wall.
Pull the rear end of the shelf
support away from the side
wall and remove it.
Install the shelf supports in
the opposite sequence.
Before the catalytic cleaning
Remove all accessories and
removable shelf supports.
Clean the oven with catalytic cleaning
Set the maximum
.
oven temperature.
Duration: 1 h
.
1
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
Clean one oven at a time.
Step 2
After cleaning, turn
the knob for the
oven functions to
the off position.
2
Clean the oven floor and the
inner door glass with warm
water, soft cloth and mild de‐
tergent.
Step 3
When the oven is
cold, clean the cav‐
ity with a wet soft
CAUTION!
Carefully handle the glass,
especially around the edges
of the front panel. The glass
can break.
Step 4
cloth.