Panasonic KX-MB2061CXB Service Manual page 148

KX-MB2061CXB/KX-MB2061CX2/KX-MB2062CXB
12.3.5.3. Copy and FAX
No. Symptom
1 NO DOCUMENT FEED (No
Document Feed, Docu-
ment Jam and Multiple Doc-
ument Feed) (P.168)
DOCUMENT JAM (No Doc-
ument Feed, Document
Jam and Multiple Document
Feed) (P.168)
MULTIPLE DOCUMENT
FEED(No Document Feed,
Document Jam and Multiple
Document Feed) (P.168)
2 Skew (ADF) (P.170)
3 The Sent FAX Data Is
Skewed (P.171)
4 The Received FAX Data Is
Skewed (P.171)
5 The Received or Copied
Data Is Expanded (P.171)
6 Black or White Vertical
Line Is Copied (P.172)
7 An Abnormal Image Is
Copied (P.173)
12.3.5.4. Cordless (handset)
No. Symptom
1 Cordless (handset)
Cause
Failed the document sensor lever
Failed the document sensor
Dirty or failed the separation roller
Dirty or failed the separation rubber
Failed the separation spring
Dust or scratch on the document paper path
Failed the gear
Failed the ADF motor
Failed the ADF cover open switch lever
Dirty or failed the separation roller
Dirty or failed the separation rubber
Failed the separation spring
Dust or scratch on the document paper path
Failed the document feed roller
Failed the document guide
The cause of ADF
The cause of scanner glass
Problem with the other FAX machine
The cause of printing
Problem with the other FAX machine
Dirty or failed the document feed roller (at ADF) Clean or replace the document feed roller
Dirty or failed the separation roller (at ADF)
Failed CIS movement (at SG)
Dirty or failed the white plate and sheet (2
places)
Dirty or failed the glass board
The cause of printing
Failed CIS
Dirty or failed the white plate and sheet (2
places)
Dirty or failed the glass board
Dirty or failed the document feed roller (at ADF) Clean or replace the document feed roller
Dirty or failed the separation roller (at ADF)
Failed CIS movement (at SG)
Failed CIS
The cause of printing
Cause
Cordless Handset does not work.
No link
Battery won't charge
No voice reception
No voice transmission
Bell does not sound
Replace the document sensor lever
Go to Sensor Section (P.196)
Clean or replace the separation roller
Clean or replace the separation rubber
Replace the separation spring
Clean the document paper path
Check the gear
Go to ADF Motor (P.208)
Replace the ADF cover open switch lever
Clean or replace the separation roller
Clean or replace the separation rubber
Replace the separation spring
Clean the document paper path
Replace the document feed roller
Replace the document guide
Go to Skew (P.164)
Check the scanner glass
Go to Skew (P.164)
Clean or replace the separation roller
Replace the belt or the gear or the shaft or the FB motor
Clean or replace the white plate and sheet
Clean or replace the glass board
Go to Dark or White Vertical Line (P.157)
Go to CIS Control Section (P.210)
Clean or replace the white plate and sheet
Clean or replace the glass board
Clean or replace the separation roller
Replace the belt or the gear or the shaft or the FB motor
Go to CIS Control Section (P.210)
Go to Dark or White Vertical Line (P.157)
See Check Power (Cordless Handset) (P.199)
See Check Link (Cordless Handset) (P.200)
See Check Battery Charge (Cordless Handset) (P.199) and
Check Battery Charge (Charger Unit) (P.199)
See Check Cordless Handset Reception (P.201)
See Check Cordless Handset Transmission (P.201)
See Bell Reception (Cordless Handset) (P.202)
148
Countermeasure
Countermeasure