4a. For Type OG01: Place the rotisserie rod through the round hole of the right-side panel of
the lid as shown in Fig. E below. Then, slide one fork onto the pointed end of the rotisserie
rod as shown in Fig. F below. Insert meat onto rotisserie rod and slide other fork onto
rotisserie rod, inserting forks into the bottom side of the chicken and centering meat
lengthwise on the rotisserie rod. Tighten the screws on the forks. Place the rotisserie
rod through the round hole of the left-side panel of lid as shown in Fig. G below, and
insert the pointed end of the rotisserie rod into the motor.
4b. For Type OG02 and OG03: Slide one fork onto the pointed end of the rotisserie rod as
shown in Fig. H below. Insert meat onto rotisserie rod and slide other fork onto rotisserie
rod, inserting forks into the bottom side of the chicken and centering meat lengthwise on
the rotisserie rod. Tighten the screws on the forks. Insert the pointed end of the rotisserie
rod into motor. Place rotisserie rod in slot as shown in Fig. I.
5. Use switch on motor housing to start and stop rotation.
Fig. E
Fig. I
840212211 ENv06.indd 3
ROTISSERIE ACCESSORY KIT
STEP-BY-STEP ASSEMBLY (cont.)
Fig. F
Fig. G
Fig. H
3
5/9/14 4:07 PM