Help With Setup - Logitech H800 Getting Started

Help with setup

Something not sound right? No sound at all? Microphone not working?
• Try moving the headset closer to the Nano receiver The wireless connection status light on the
headset turns solid green when the headset is in range (up to 40ft/12 m) with the Nano receiver
See the wireless performance table below for Nano receiver placement tips
• When using with the Nano receiver, the Device Selection switch on the headset should be set
to the last position
• Make sure the headset is the active input/output audio device in both your application and
operating system For more information, see Test the headset
• Adjust the volume and microphone settings to an audible level in both your application and
operating system
• Quit and restart your media application
• If you're using a USB hub (powered or un-powered), try plugging the Nano receiver directly
into your computer
• Try using the headset with another computer
Headset not charging?
• Use the provided USB charging cable Connect the cable to the charging port on the headset,
and connect the other end of the cable to a USB port on your computer
• If you are using a USB hub, connect the charging cable directly to a USB port on your computer
• If the battery status light on the headset is not amber (solid or flashing), the headset is
not receiving power from your computer's USB port Try another USB port on your computer,
and then turn on or wake up your computer to charge the headset
Music controls not working?
• Music controls for applications other than iTunes® and Windows Media Player® are not supported
• If you use Windows®, you can download an optional software enhancement from
www logitech com/support to improve music control
• Some functions of the headset may not be supported depending on the tablet, smartphone and/
or application
Logitech® Wireless Headset H800