4A: Connecting The Audio Components - Sony STR-DH700 Operating Instructions Manual

Notes
• Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tips
• To output the sound of the TV from the speakers
connected to the receiver, be sure to
– connect the audio output jacks of the TV to the
TV IN jacks of the receiver.
– turn off the TV's volume or activate the TV's
muting function.
• All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
4a: Connecting the audio
components
Connecting a Super Audio CD/
CD player or CD recorder
The following illustration shows how to
connect a Super Audio CD player, CD player
or CD recorder.
Before connecting the cords, be sure to
disconnect the AC power cord (mains lead).
After connecting your audio component,
proceed to "4b: Connecting the video
components"(page 22).
Super Audio CD
player/CD player/
CD recorder
EZW-T100
SAT DVD VIDEO 1 MONITOR
IN IN IN OUT
Y
P /
B
C
B
VIDEO
IN
P /
R
C
R
COMPONENT VIDEO
AUDIO
OUT IN IN IN
L
R
SA-CD/CD/CD-R TV SAT
A Audio cord (not supplied)
A
ANTENNA
AM
SIRIUS TV DIG
DMPORT
DC5V
0.7A MAX
IN
OPTICAL OPTIC
VIDEO VIDEO VIDEO VIDEO
IN OUT IN OUT
MONITOR
AUDIO AUDIO AUDIO
IN OUT IN
AUDIO
OUT
BD VIDEO 1
SUBWOOFER
21 US