4B: Connecting The Video Components - Sony STR-DG820 Operating Instructions Manual

4b: Connecting the video components

How to connect your
components
This section describes how to connect your
video components to this receiver. Before you
begin, see "Component to be connected"
below for the pages which describe how to
connect each component.
After connecting all your components,
proceed to "5: Connecting the antennas
(aerials)" (page 28).
Component to be connected
Component
TV
With HDMI jack
DVD player
Satellite tuner/Set-top box
VCR, DVD recorder
Camcorder, video game, etc.
If you want to connect several
digital components, but cannot
find an unused input
See "Listening to digital sound from other
inputs (DIGITAL ASSIGN)" (page 83).
22
US
Video input/output jack to be
connected
The image quality depends on the connecting
jack. See the illustration that follows. Select
the connection according to the jacks on your
components.
Page
19
23
25
Notes
• Before connecting cords, be sure to disconnect the
26
AC power cord.
27
• Be sure to turn on the receiver when the video and
audio signals of a playback component are being
27
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
Digital Analog
High quality image