Grizzly T32536 Owner's Manual page 32

H7940—HSS Lathe Chisels, 3-Pc. Set
Ideal for bowl turning and detail work. Each chisel
measures roughly 16" long, with 10" ash handles,
and the high-speed steel blades measure a
full ⁄ " thick! The set includes one round, one
7
32
curved, and one 90° corner chisel. Chisel set is
protected in a fitted wooden box.
Figure 36. Model H7940 Lathe Chisel 3-Pc. Set.
T25802—Woodworking Calipers, 5-Pc. Set
Includes compass, straight dividers, inside cali-
pers, outside calipers, and inside/outside calipers.
Perfect for woodturning and general layout work.
Figure 37. Model T25802 Woodworking Calipers
5-Pc. Set.
order online at
-30-
www.grizzly.com
T10730—48" Birch Workbench
Designed to accommodate larger benchtop
machines, the table has a butcher block finish and
measures 48" x 25" x 1
construction is highlighted by the mortised cross
braces and square-profile legs.
Figure 38. Model T10730 48" Birch Workbench.
D3098—Center Finder
Find the center of round or square stock for
lathe turning. One side locates a diagonal line
on square stock up to 8" x 8", and the other side
locates a diagonal line on round stock up to 4
in diameter. Marking two opposite diagonal lines
determines the center point.
Figure 39. Model D3098 Center Finder.
1-800-523-4777
or call
Model T32536 (Mfd. Since 10/20)
⁄ " thick. The solid birch
1
4
1
⁄ "
2