U-Line ADA Series Use And Care Manual page 12

Figure 12
5. Remove screws on opposite side of cabinet (Figure 13).
Note that there may be a nut behind one or both
screws on either side.
Figure 13
6. Install hinge on opposite side, bottom of cabinet
(Figure 14). Replace nut on back side where installed.
Align hinge outer edge with cabinet before tightening
screws.
10
ULIN_0122 _A
ADA15IM
1
Figure 14
7. Relocate plastic spacer/bushing (Figure 15) on bottom
of door to opposite side, and place door on bottom
hinge pin. Clean out bushing hole in door bottom with
a screwdriver if necessary.
Plastic
Plug Hole
Right Side
Door Swing
Right Side
Hinge
Figure 15
8. Remove plastic hole plug (Figure 16) from door handle
and relocate on opposite side.
9. Remove pivot screw from top hinge, invert screw and
reinstall pivot screw in top hinge. See Figure 29.
ADA SERIES
ULIN_0109_A
Hinge
Plastic
Plug Hole
Screw
Left Side
Door Swing
Invert Invert
Screw Hinge
ULIN_0142_A