Advertisement
Wi-Fi and Bluetooth Questions:
Do the MBX-PRE and MBX-AMP have Wi-Fi capabilities?
Yes. In addition to the wired Ethernet connection (recommended), both the MBX-PRE and MBX-AMP offer fully Wi-Fi Certified® dual
band 802.11ac Wi-Fi connections. The Wi-Fi can be configured easily using the Google Home app on either iOS or Android devices, or
can be configured through Web Config if connected with a wired connection.
Can the internal Wi-Fi radio be disabled?
Yes, the Wi-Fi radio can be disabled by setting the Networking "Type" to "Wired" in WebConfig.
How do you pair a Bluetooth device to use it as an audio source?
Pairing is quick and easy. Simply press and hold the outermost front-panel buttons (Favorite 1 and Volume Up) simultaneously for a
few seconds until the front panel LED blinks blue twice. The blinking LED signals that the MBX is now in pairing mode. Simply go to
the Bluetooth settings of the device you wish to pair and search for the MBX product. The Bluetooth name of the MBX product will
match the name that is configured in the device, such as "Bedroom" or "Kitchen"
Is there a way to set a Bluetooth password for the MBX products?
Not at this time (28/02/19). Russound are planning on adding that feature in a future software update.
Other Questions:
Are the MBX Series part of the RCI program?
Yes. The MBX-Series of products are all part of the RCI (Russound Certified Installer) program and must be installed and configured
by an approved professional installer. They are not designed to be installed and configured directly by consumers in order to
guarantee the best possible installation and user experience. Contact us directly for be RCI registered.
Are the MBX-AMP and MBX-PRE rack-mountable?
The MBX-AMP and MBX-PRE are rack-mountable using a rack shelf. The units are 1U high but it is recommended to use a 2U space to
allow for ventilation above the units. Two units fit easily side-by-side within the rack space. So use a 1U shelf with a 1U gap or use a
2U shelf to allow for adequate ventilation and air circulation.
Are the MBX-PRE and MBX-AMP wall-mountable?
The MBX-AMP includes two wall-mount brackets and mounting screws. The MBX-PRE is primarily designed for use in an equipment
closet or rack, it does not include mounting brackets (MBX-AMP mounting brackets could be used on the MBX-PRE too, if needed).
How do the front panel buttons work on the MBX products?
The MBX-PRE and MBX-AMP have the same convenient front panel controls. There is Volume+, Volume-, Play/Pause, Favourite 1 and
Favourite 2. The favourite buttons work like radio pre-set buttons in a car. Just press and hold the button to store the currently
playing selection as a new favourite. A quick tap of the button will re-select that item at any time. Additionally, the Play button
works as a quick way to restart the last played content. Just press Play at any time to select and play the last played content.
Bluetooth Pairing Mode is also activated with the front panel buttons. Pressing and holding the outermost buttons (Favourite 1 and
Volume +) will cause the front panel LED to blink blue twice and for the MBX product to enter Bluetooth pairing mode. For the MBX-
AMP, IR learning mode is also activated with the front panel buttons. Simply press and hold the middle button (Play) and the
rightmost button (Volume +) simultaneously until the front panel LED begins blinking green
5
Advertisement
