Table of Contents
Advertisement
How to Change Management IP Address for Existing Ethernet Port
Users can use the following command to change management IP address for existing uplink Ethernet port.
The commands are listed as below.
Command
$ipconfig <ip> <mask>
How to Create more VC/EOA/Bridge
Users can use the following command to create more VC/EOA/Bridge. The commands are listed as
below.
Command
$create atm vc intf ifname aal5-* vpi
<vpi> vci <vci> lowif atm-*
[vcmux/llcmux] [fast/interleaved]
$create eoa intf ifname eoa-* lowif
aal5-*
$create bridge port intf portid
<bridge-port-id> ifname eoa-*
How to Setup SNMP Community/Host/Trap
Users can use the following command to setup SNMP community/host/trap. The commands are listed as
below.
Command
$snmpconfig <ro community> <rw
community> <trap community> <host ip>
How to Create VLAN
Users can use the following command to create VLAN. The commands are listed as below.
Command
$create vlan static vlanname
<vlan-name> valnid <vlan-id>
[egressports <bridge ports>]
How to Setup Port VLAN ID (PVID)
Users can use the following command to setup port VLAN ID. The commands are listed as below.
Command
$modify gvrp port info portid
<bridge-port-id> portvlanid
<default-pvid>
Quick Start Guide for VigorAccess
Description
Description
(*:0 ~ 23 is used for atm; 0~191 is used for aal5)
(*:0~191 is used for aal5 and eoa)
(*:0~191 is used for eoa,; 1~192 is used for
<bridge-port-id>)
Description
Create SNMP community and host to manage the
device through SNMP
Description
Create VLAN
(vlan-id is from 1~4094)
Description
Setup port VLAN ID
Version: 1.2
13
Advertisement
Table of Contents
