Wireless Rate Control - Draytek Vigor 2950 User Manual

VLAN0-3
W_VLAN0-15
3 . 1 2 . 4 W i r e l e
3 . 1 2 . 4 W i r e l e
Rate Control manages the transmission rate of data in and out through the router. You can
also manage the in/out rate of each wireless VLAN. Go to VLAN menu and select Wireless
Rate Control. The following page will appear. Click Enable to invoke VLAN function.
For the rate control of wireless connection, please open VLAN menu and choose Wireless
Rate Control. The following page will be shown for you to adjust.
Enable
Upload Rate
Download Rate
146
s s R a t e C o n t r o l
s s R a t e C o n t r o l
It represents the groups of virtual LAN connected by Ethernet
interface.
It represents the groups of wireless VLAN communicated by
wireless interface.
Check this box to enable this function (for Rate Control). The
rate control will limit the transmission rate for upload and
download.
It decides the rate of data transmission for output. The default
setting is 300. The range must be between 100 kbps to
20,000kbps. Adjust the values according to your necessity.
It decides the rate of data transmission for input. The default
setting is 300. The range must be between 100 kbps to
20,000kbps. Adjust the values according to your necessity.
Vigor2950 Series User's Guide