Advanced Settings - Sony STR-DA9000ES Operating Instructions Manual

For advanced EQUALIZER menu
adjustments
Use the CUSTOMIZE menu and set "MENU
EXPAND" to "ON" to enable advanced
adjustments.
For details on "MENU EXPAND", see page 40.
For details on how to set the items, see page 46.
US
40

Advanced settings

Using the CUSTOMIZE menu
to adjust the receiver
You can adjust various receiver settings using
the CUSTOMIZE menu.
1
Rotate MAIN MENU to select
"CUSTOMIZE".
2
Rotate MENU to select the parameter.
For details, see "CUSTOMIZE menu
parameters" below.
3
Rotate –/+ to adjust the selected
parameter.
4
Repeat steps 2 and 3 to adjust the other
items.
CUSTOMIZE menu parameters
The initial setting is underlined.
x MENU EXPAND (Menu expanding)
• ON
The advanced parameters for the SPEAKER SET
UP, SURR SET UP and LEVEL menus are displayed
and can be adjusted.
For details on each setup item, see pages 21, 37, 38
and the following pages.
• OFF
The advanced parameters are not displayed.
x DTS 96/24 DEC. (DTS 96/24 decoding mode)
• AUTO
When a DTS 96/24 signal is input, it is played back
at 96 kHz sampling frequencies.
• OFF
Even when a DTS 96/24 signal is input, it is played
back at 48 kHz sampling frequencies.
Note
This parameter is valid only in the A.F.D. mode
(page 31). In other sound fields, this parameter is
always set to "OFF".
x SB DECODING
(Surround back decoding mode)
You can use the CUSTOMIZE menu to set the
surround back decoding mode. See page 34.
• AUTO
• MATRIX
• OFF