Changing The Display - Sony STR-DA9000ES Operating Instructions Manual

Each time you press the button, you can
select the preset station as follows:
tA1yA2y...yA0yB1yB2y...yB0T
Using the remote (RM-TP2 only)
1
Touch RM SELECT.
2
Touch AMP, then touch TUNER.
The input of the receiver switches to
TUNER.
3
Touch RM SELECT.
4
Touch TUNER.
5
Touch SHIFT to select the memory page (A,
B, or C).
6
Touch PRESET +/– to select the preset
station you want.
You can also select the preset station
directly.
In the TUNER screen, touch b to display
screen 2/3. Touch A, B, or C to select the
memory page, then touch the numeric
buttons to enter the preset number.
US
28
tC0y...yC2yC1T

Changing the display

Changing the information in
the display
You can check the sound field etc. by changing
the information in the display.
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display will
change as follows.
All inputs except "FM" and "AM"
Index name and sound field name* y Input
name and sound field name
FM and AM
Preset station name and sound field name* y
Input name and sound field name
* Index name appears only when you have assigned
one to the input or preset station (page 49). Index
name does not appear when only blank spaces have
been entered, or it is the same as the input name.
Displaying the input stream
information
You can check the input stream information
(about format, channel, etc.) of digital input
signals. The input stream information also
appears for 4 seconds when the receiver detects
any changes in the digital input signal.
1
Rotate MAIN MENU to select "STREAM
INFO".
2
Rotate MENU.
The input stream information appears.
3
Rotate –/+ for more information.
Changing the brightness of
the display
1
Touch AMP in the RM SELECT screen.
2
Touch b to display screen 5/6, then
touch DIMMER repeatedly.
The brightness of the display changes in 3
steps (0% DOWN, 60% DOWN, 100%
DOWN*).
* When 100% DOWN is selected, the indication
"100% DOWN" does not appear in the display.