Sony STR-DA3600ES Operating Instructions Manual page 102

Recording with an audio
component
You can record with an audio component using
the receiver. Refer to the operating instructions
supplied with your MD deck or tape deck.
1
Select " Input" from the
menu, then press
2
Select the playback
component, then press
3
Prepare the playback
component for playing.
For example, insert a CD into the CD
player.
4
Prepare the recording
component.
Insert a blank MD or tape into the
recording deck and adjust the recording
level.
5
Start recording on the
recording deck, then start
playback on the playback
component.
Notes
• If you use an SCMS-compliant recording deck,
you may not make recordings.
• The audio input signals from the MULTI
CHANNEL INPUT jacks may not be output.
• Only analog input signals are output from the
analog output jack (for recording).
102
GB
• Signals input from the COAXIAL IN jack or the
OPTICAL IN jack are output to the OPTICAL
MD/TAPE OUT jack, unless MD/Tape input is
selected.
• HDMI sound cannot be recorded.
To record digital sound
V/v/b,
Connect a component for playback to the
digital audio input (OPTICAL IN) jack, and
connect the recording component to the
MENU
OPTICAL MD/TAPE OUT jack.
Recording with a video
component
1
2
or b.
3
.
4
5
Notes
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the sources.
• Analog input signals (audio and composite video)
are output from the analog output jacks.
• While only composite video signals are being
recorded, the auto standby function of the receiver
may start up and interrupt the recording. In this
case, set "Auto Standby" to "OFF" (page 124).
Select " Input" from the
menu, then press
Select the playback
component, then press
Prepare the component for
playing.
For example, insert the video tape you
want to copy into the VCR.
Prepare the recording
component.
Insert a blank video tape, etc., into the
recording component (VIDEO 1) for
recording.
Start recording on the
recording component, then
start playback on the playback
component.
or b.
.