Operating Without Connecting To The Tv - Sony STR-DA3400ES Operating Instructions Manual

To set up the speakers
Set "Sur Back Assign" to "BI-AMP" in the
Speaker settings menu. The same signals
output from the SPEAKERS FRONT A
terminals can be output from the SPEAKERS
SURROUND BACK terminals by setting "Sur
Back Assign" to "BI-AMP".
Notes
• You cannot use the SPEAKERS FRONT B
terminals for a bi-amplifier connection.
• Set "Sur Back Assign" to "BI-AMP" before you
perform Auto Calibration.
• If you set "Sur Back Assign" to "BI-AMP", the
speaker level, balance, and equalizer settings of the
surround back speakers become invalid, and those
of the front speakers are used.
• Signals output from the PRE OUT jacks are used
with the same settings as those of the SPEAKERS
terminals.
• If you set "Speaker Pattern" to a setting with
surround back speakers, you cannot set "Sur Back
Assign" to "BI-AMP".
108 US
Operating without
connecting to the TV
You can operate this receiver using the display
window if you do not use a GUI when a TV is
not connected.
Press GUI MODE to display "GUI
OFF" in the display window.
When "GUI MODE" is displayed in the
display window, the menu is set to display on
the TV screen using a GUI.
Navigating through menus on
the display window
THEATER
SHIFT TV
1 2
VIDEO1 VIDEO2
4 5
SAT TV
7 8
TUNER PHONO
-/-- 0/10
HDMI1 HDMI2
XM SIRIUS
2CH/
A.DIRECT A.F.D.
INPUT
RESOLUTION MODE
CATEGORY
1
Press AMP.
2
Press MENU.
3
Press V/v repeatedly to select
the menu you want.
1
ZONE AMP
3
TV INPUT
BD DVD
6
WIDE
MD/ SA-CD/
TAPE CD
9
D.TUNING
MULTI
DMPORT
IN
ENT/MEM CLEAR
HDMI3 HDMI4
SOURCE
MOVIE MUSIC
NIGHT
SLEEP MODE
GUI GUI
MODE MODE
3-8
HOME
2