Spare Tire - Buick 1999 Park Avenue Owner's Manual

Removing the Flat Tire and Installing the

Spare Tire

1. Use the wheel wrench to loosen the wheel nuts, but
don't remove them yet.
3. Turn the wheel wrench counterclockwise to lower
the jack head until it fits under the vehicle.
2. The jack has a bolt at the
end. Attach the wheel
wrench to the bolt to
create a jack handle.
4. Near each wheel well is a notch in the plastic trim
panel to position the jack head. You'll find the word
JACK and an arrow stamped into the plastic near
each notch. Position the jack under the vehicle and
raise the jack head until it fits firmly against the
sheet metal next to the word JACK. Do not raise the
vehicle yet. Put the compact spare tire near you.
yellowblue
5-21