Electrolux HKK670MF User Manual page 14

6.2 FlexiBridge Standard mode
This mode is active when you activate the
hob. It connects the sections into two
separate cooking zones. The sides of the
zones which operate together in this mode
light up, and they are linked with shorter
illuminated lines. You can set the heat setting
for each zone separately. Use two left side
control bars.
Correct cookware position:
Incorrect cookware position:
14 ENGLISH
> 160 mm
6.3 FlexiBridge Big Bridge mode
To activate the mode touch
the correct mode indicator
connects three rear sections into one cooking
zone. The front section is not connected and
operates as a separate cooking zone. You
can set the heat setting for each zone
separately. Use two left side control bars.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected sections. If
you use cookware smaller than two sections
the control bar blinks and after 2 minutes the
zone switches off.
Incorrect cookware position:
until you see
. This mode