Controls On The Steering Wheel Cruise Control; Cruise Control - Alfa Romeo Giulia-GTA Owner's Handbook Manual

The device is disabled until the speed
drops below the set limit, after which it
reactivates automatically.
PROGRAMMED SPEED ICON FLASHING
The programmed speed flashes in the
following cases:
when the accelerator pedal has been
fully depressed and the car has exceeded
the programmed speed;
activating the system after setting a
limit below the effective speed of the
car;
in the event of sharp acceleration.
DEACTIVATING THE DEVICE
The device can be activated/deactivated
from the Connect system.
Deactivating the device
To access the function, on the main menu
select the following items in sequence:
"Settings", "Safety", "Speed Limiter" and
"Off".
Automatic off of the device
The device deactivates automatically in
the event of fault in the system. In this
case, contact a Dedicated Alfa Romeo
Dealership.
Temporary signal loss
When the device loses the signal,
the white symbol without the speed
indication lights up on the display.
140
System failure
The amber symbol lights up on the
display in case of system failure.

CRUISE CONTROL

This is an electronically controlled
driving assistance device that allows the
desired car speed to be maintained,
without having to press the accelerator
pedal. This device can be used at a
speed above 20 mph (30 km/h) on long
stretches of dry, straight roads with few
variations (e.g. motorways).
It is therefore not recommended to use
this device on extra-urban roads with
traffic. Do not use the device in town.
The Cruise Control buttons are located
on the left side of the steering wheel.
To ensure correct operation, the Cruise
Control is designed to deactivate if
more than one function is operated
simultaneously. In this case the system
can be reactivated by pressing the
/ CANC button and setting the desired
speed.
Travelling downhill, the system could
brake the car to keep the set speed
unvaried.
ACTIVATING THE DEVICE
105) 106) 107)
To activate the device press button
fig. 153.
The white symbol on the instrument
panel display fig. 154 switches on to
signal that the device is on.
The Cruise Control function can remain
active concurrently with the Speed
Limiter device. If a speed limit below the
one indicated in the Cruise Control is
selected, the Cruise Control speed will be
lowered to that of the Speed Limiter.
153
154
The device cannot be engaged in first
or reverse gear: it is recommended to
engage it in 3rd gear or higher.
07146S0030EM
05036S0200EM