Steren POD-150 User Manual page 5

LISTENING TO MUSIC WHILE THE BATTERY IS
RECHARGED
1.- Plug the USB cable to the base. The extreme connector plug
it to AC power adapter.
2.- Connect the AC power adapter to an outlet. The indicator
LED will light in red.
3.- Insert a pair of headphones into Line Out connector.
4.- Place the iPod into the Dock connector. The charging
indicator will light on.
5.- Turn the iPod on, search, select and begin the songs
playback.
6.- Use the headphones to listen the music.
7.- Use the remote control to set the volume level or choose a
different song.
8.- If the battery is fully charged or you don't want to use the
iPod, turn it off and release from the base.
WATCHING VIDEOS OR PHOTOGRAPHS IN A TV
SET (Function available only for certain models)
The base allows you to connect an AV cable in order to watch
movies, videos or photographs in your TV set.
1.- Place the base in a fl at surface, near your TV.
2.- Plug the 3,5mm connector of the AV cable into Line OUT jack.
3.- Plug the RCA connectors into the AV jacks of the TV set.
Make sure to match the colours from the cable and the TV jacks,
otherwise the video may not visualize correctly.
4. Turn the TV and the iPod on.
5.- Playback a video, movie or pictures slide. The image will be
displayed in the monitor.
6.- Turn the device off and unplug it after their use.
Please, refers to iPod's instruction manual in order to know Please, refers to iPod's instruction manual in order to know
how to visualize videos, movies or photographs in a TV. how to visualize videos, movies or photographs in a TV.
Due to TV has higher video resolution than iPod, the Due to TV has higher video resolution than iPod, the
displayed image may not be good enough. displayed image may not be good enough.
ENGLISH-5