Specific Safety Rules - Yamato SG 710 Instruction Manual

99524
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of the power tool for operations different from those
intended could result in a hazardous situation.
5) Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.

SPECIFIC SAFETY RULES

a) Hold tool by insulated grip surface when performing an operation where the cutting tool may contact the
hidden wiring or its own cord. Contact the alive wire make exposed the metal parts of the tool alive and shock the
operator.
b) Do not stare at the tool with the blade touching any surface. The blade action will bounce the tool and may
cause bodily injury.
c) Allow the tool to come to a complete stop before putting it down. A running tool will jerk when the blade tip
contacts any surface.
d) Always wear safety glasses or goggles, normal prescription eye or sunglasses are not safety glasses
e) Do not cut oversized work pieces
f) Do not cut nails or screws unless you are using a blade specifically designed for this purpose, inspect your
material before cutting
g) Before switching on the tool, be sure the blade in not contacting the work piece.
h) Keep hands away from moving parts and on the top surface of the work piece. Do not place hands below work
surface while saw is operating.
i) Check your area for proper clearance before cutting. This will avoid cutting into your workbench, the floor, etc.
Explanation of symbols
Conforms to relevant safety standards
To reduce the risk of injury, the user must read and understand this
manual before using this product.
Wear ear protectors. Exposure to noise can cause hearing loss.
Wear eye protection.
Wear respiratory protection.
Do not dispose of old appliances with domestic rubbish
Double insulation
Technical Specification
Model
Code
Rated voltage /frequency
Rated power
No load stroke rate
Max.cutting depth in wood
Standard accessories
SG 710
99524
230-240V 50HZ
710W
0-2800/min
115mm
Metal-cutting saw blade -- 1 pc
17