Return To Bosch Rexroth Ag; Packaging; Materials Used - Bosch Rexroth 4WRPEH6 3X Operating Instructions Manual

Extension and modification 37/44
12.2 Return to Bosch Rexroth AG
The products manufactured by us can be returned to us for disposal purposes
at no costs. There must be no inappropriate foreign substances or third-party
components when products are returned. The components have to be sent
free to the door to the following address:
Bosch Rexroth AG
Industrial Hydraulics Service
Bürgermeister-Dr.-Nebel-Straße 8
97816 Lohr am Main
Germany

12.3 Packaging

Upon request, reusable systems can be used for regular deliveries.
The materials for disposable packaging are mostly cardboard, wood, and expanded
polystyrene. They can be recycled without any problems. Due to ecological reasons,
disposable packaging should not be used for returning products to Bosch Rexroth.

12.4 Materials used

Hydraulic components from Bosch Rexroth do not contain any hazardous materials
that could be released during intended use. Normally, no negative effects on human
beings and on the environment have to be expected.
The valve basically consists of:
• Cast iron
• Steel
• Aluminum
• Copper
• Plastics
• Electronics components and assemblies
• Elastomers
12.5 Recycling
Due to the high share of metal, the products can mostly be recycled. In order to
achieve an ideal metal recovery, disassembly into individual assemblies is required.
The metals contained in electric and electronic assemblies can be recovered by
means of special separation procedures as well. If the products contain batteries or
accumulators, they have to be removed before recycling and furnished to the battery
recycling, if possible.
13 Extension and modification
The valve with IO-Link interface must not be extended or modified. Modification of
the valve will lead to expiry of warranty.
RE 29118-B/09.2021; 4WRPEH6_3X, 4WRPEH10_3X, 4WRPE6_3X, 4WRPE10_3X, 4WRLE_4X; Bosch Rexroth AG